Complete your TORO
More possibilities
Every day
From stirrup production and angle control to bar handling. Find the accessories for your machine.
16 Accessories
OptionalBending and stirrupsUnique 2 in 1
A stirrup-bending tool and measuring device in one accessory. Processes bars up to Ø 16 mm and bends several stirrups simultaneously, with two movable stops for setting side lengths.
OptionalSpiral formingSpiral attachment
Produce continuous spirals on bending and combined machines using bars up to Ø 16 mm. Adjustable pitch, with no bending radius limit imposed by the attachment.
OptionalAngle controlBasic Angle Control
An electronic board that stores up to 6 angles, with automatic or manual operation. For three-phase machines; also available in a two-speed version.
Angle Control
An electronic panel for programming up to 10 angles in sequence without stop pins. Switch to manual mode as needed. For three-phase bending and combined machines.
OptionalCuttingStand and foot pedal
Dedicated cutting-machine stand with a control foot pedal. An optional solution for organising the cutting workstation, available for all C-series models.
Maintenance · ExtraCuttingCircuit breaker guard
A guard for the thermal-magnetic circuit breaker, reducing the risk of accidental damage on site.
Standard on CE · Optional on non-CEElectrical controlPhase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
OptionalCuttingBar guide
Guides bars from the roller bench to the cutting area. Improves handling continuity and offers protection for the operator’s lower body.
OptionalWorkstationModular roller workbench
A storage surface and roller bed for rebar handling. An extendable 2-metre base module, adjustable feet and a dismantlable frame. For all TORO machines.
Maintenance · ExtraProtectionMachine cover
Cover for all TORO models: cutting, bending, combined, stirrup and spiral machines. Protects the machine when not in use, with dimensions matched to the model.
OptionalMachine configurationTwo-speed motor
Optional for three-phase bending and combined machines. Adapts speed to the job and requires an Angle Control or Basic Angle Control panel.
Maintenance · ExtraMachine configurationCustom pins and bushes
Additional pins and bushes, available in custom sizes for specific bending requirements. These are extra to the set supplied as standard with each model.
Maintenance · ExtraMachine configurationGrease pump
Manual pump for maintaining cutting-machine lubrication points. This is an extra: greasing points are standard, while the pump is ordered separately.
OptionalMachine configurationCAL35 small-diameter kit
Optional CAL35 kit for small bar diameters Ø 6–8 mm. Extends the standard Ø 10–32 mm range downwards; it can be fitted to and removed from the prepared work surface.
Standard on CE · Optional on non-CEMachine configurationGearbox guard
Motor and gearbox guard: standard on the CE version, optional on the non-CE version.
Original spare-parts kits
Original spare-parts kits for cutting, bending, combined machines and ST-16. Contents and availability depend on the model: always include the serial number with your enquiry.