Solid mechanical design
A one-piece ductile cast iron gearbox, selected motors and electrical components, and checks during production.
P series · 100% Made in Italy
Mechanical bending machines
Mechanical rebar bending machines from P34 to P74. The enlarged turntable and long saddles support different bending radii and double bends. Choose capacity, bushes and accessories to suit your reinforcing-steel work.
Request informationP34P38P44P54P56P74Models
Ø 60 mmMaximum bending capacityP74 · 1 bar · 65 kg/mm²
Ø 50 mmMaximum bending capacityP74 · 1 bar · 85 kg/mm²
Maximum capacities across the range. See the tables for each model’s values.
Compare technical data
1 / 5
Inside the machine
Shape with precision
More bending possibilities
The enlarged plate accommodates larger bending radii. Extended carriages allow double bending.
Control of the bar
The bar stop, pins and bushes guide the operation. The electric pedal leaves the operator’s hands free.
Choose your configuration
Models and specifications
| Model | Motor (kW) | Dimensions (cm) | Weight (kg) |
|---|---|---|---|
| P34 | 2.2 | 75 × 80 × 85 | 285 |
| P38 | 3 | 86 × 90 × 85 | 320 |
| P44 | 3 | 105 × 95 × 89 | 469 |
| P54 | 4 | 105 × 95 × 89 | 582 |
| P56 | 5.5 | 130 × 95 × 89 | 676 |
| P74 | 7.5 | 160 × 116 × 96 | 1,650 |
Bending capacity
Diameters in mm, according to steel strength and the number of bars processed together.
On smaller screens, scroll the table sideways to compare all values.
| Model | Steel strength: 65 kg/mm² | Steel strength: 85 kg/mm² | ||||
|---|---|---|---|---|---|---|
| 1 bar | 2 bars | 3 bars | 1 bar | 2 bars | 3 bars | |
| P34 | Ø 30 | Ø 22 | Ø 18 | Ø 28 | Ø 20 | Ø 16 |
| P38 | Ø 34 | Ø 26 | Ø 20 | Ø 32 | Ø 24 | Ø 18 |
| P44 | Ø 38 | Ø 30 | Ø 24 | Ø 36 | Ø 28 | Ø 22 |
| P54 | Ø 44 | Ø 34 | Ø 28 | Ø 40 | Ø 32 | Ø 24 |
| P56 | Ø 46 | Ø 36 | Ø 30 | Ø 42 | Ø 34 | Ø 26 |
| P74 | Ø 60 | Ø 42 | Ø 34 | Ø 50 | Ø 36 | Ø 30 |
Metric values from the original TORO table. Always confirm capacity and configuration with the manufacturer.
Included with the machine
Standard equipment
Components, tools and controls supplied with your TORO. Differences between CE and non-CE versions are shown below.
Standard equipment
Pins, bushes and controls
1 square pin, 1 stirrup-bending pin, 1 checking block, 1 foot pedal and a set of Allen keys. Bush-holding pin quantities and bush diameters vary by model: see the table below.
Standard equipment
Long saddles for double bending
Extended checking saddles for double bending and different working configurations.
Standard on CE · Optional on non-CE
Phase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
Included bushes, model by model
The set photo is illustrative. Standard quantities and diameters are those listed for each model.
| Model | Bush-holding pins (qty) | Bushes (qty) | Included bush Ø (mm) | Turntable Ø (mm) |
|---|---|---|---|---|
| P34 | 3 | 5 | Ø 50 / Ø 60 / Ø 70 / Ø 80 / Ø 95 | Ø 335 |
| P38 | 3 | 6 | Ø 50 / Ø 60 / Ø 70 / Ø 80 / Ø 95 / Ø 120 | Ø 395 |
| P44 | 3 | 7 | Ø 50 / Ø 60 / Ø 70 / Ø 80 / Ø 95 / Ø 120 / Ø 150 | Ø 460 |
| P54 | 3 | 7 | Ø 60 / Ø 70 / Ø 80 / Ø 95 / Ø 120 / Ø 150 / Ø 175 | Ø 550 |
| P56 | 3 | 7 | Ø 60 / Ø 70 / Ø 80 / Ø 95 / Ø 120 / Ø 150 / Ø 175 | Ø 550 |
| P74 | 5 | 7 | Ø 80 / Ø 95 / Ø 110 / Ø 150 / Ø 200 / Ø 240 / Ø 300 | Ø 720 |
Complete your workstation
Accessories
For your machine
OptionalBending and stirrupsUnique 2 in 1
A stirrup-bending tool and measuring device in one accessory. Processes bars up to Ø 16 mm and bends several stirrups simultaneously, with two movable stops for setting side lengths.
For:Bending machinesCombined machines
Details and compatibility
OptionalSpiral formingSpiral attachment
Produce continuous spirals on bending and combined machines using bars up to Ø 16 mm. Adjustable pitch, with no bending radius limit imposed by the attachment.
For:Bending machinesCombined machines
Details and compatibility
OptionalAngle controlBasic Angle Control
An electronic board that stores up to 6 angles, with automatic or manual operation. For three-phase machines; also available in a two-speed version.
For:Bending machinesCombined machines
Details and compatibility
Angle Control
An electronic panel for programming up to 10 angles in sequence without stop pins. Switch to manual mode as needed. For three-phase bending and combined machines.
For:Bending machinesCombined machines
Details and compatibilityStandard on CE · Optional on non-CEElectrical controlPhase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
For:Cutting machinesBending machinesCombined machinesStirrup bending machines
Details and compatibility
OptionalWorkstationModular roller workbench
A storage surface and roller bed for rebar handling. An extendable 2-metre base module, adjustable feet and a dismantlable frame. For all TORO machines.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraProtectionMachine cover
Cover for all TORO models: cutting, bending, combined, stirrup and spiral machines. Protects the machine when not in use, with dimensions matched to the model.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
OptionalMachine configurationTwo-speed motor
Optional for three-phase bending and combined machines. Adapts speed to the job and requires an Angle Control or Basic Angle Control panel.
For:Bending machinesCombined machines
Details and compatibility
Maintenance · ExtraMachine configurationCustom pins and bushes
Additional pins and bushes, available in custom sizes for specific bending requirements. These are extra to the set supplied as standard with each model.
For:Bending machinesCombined machines
Details and compatibility
Maintenance · ExtraMachine configurationOriginal spare-parts kits · Bending machines
Original spare-parts kits for cutting, bending, combined machines and ST-16. Contents and availability depend on the model: always include the serial number with your enquiry.
For:Bending machines
Details and compatibilityConfirm compatibility and power supply for your specific model.