Three rollers. One curve
Heat-treated alloy rollers guide and curve the bar continuously.
CAL35 · 100% Made in Italy
CAL35 spiral machine
A three-roller machine for forming reinforcing-steel circles, arcs and spirals. CAL35 processes Ø 10–32 mm bars and Ø 6–8 mm with the optional kit. A two-speed motor and motorised diameter adjustment are standard; a tilting configuration is also available.
Request informationCAL35Models
Ø 10–32 mmBar diametersSteel: 85 kg/mm²
28–200+ cmSpiral diameterCircles, arcs and spirals
Ø 6–8 mm with the optional small-diameter kit.
Compare technical data
1 / 6
Inside the machine
Strength takes shape
Selectable speed
The two-speed motor is included as standard to adapt the process to different bar diameters.
Horizontally, too
The tilting version makes spirals easier to handle. The optional small-diameter kit allows processing down to Ø 6 mm.
Choose your configuration
Models and specifications
| Specification | CAL35 |
|---|---|
| Standard bar diameters | Ø 10–32 mm |
| Small diameters with optional kit | Ø 6–8 mm |
| Spiral diameters | Ø from 28 cm to over 200 cm |
| Catalogue weight | 356 kg |
| Versions | Standard and tilting |
Included with the machine
Standard equipment
Components, tools and controls supplied with your TORO. Differences between CE and non-CE versions are shown below.
Standard equipment
Motor, panel and foot pedal
Electrical panel and two-speed motor as standard, double control foot pedal and a set of Allen keys.
Standard equipment
Three rollers and pitch adjustment
Three hardened-alloy rollers and a mushroom-shaped device for adjusting spiral pitch. Standard bar range Ø 10–32 mm.
Standard equipment
Motorised diameter adjustment
Standard equipment: precisely adjusts the bending diameter and makes loading and unloading material easier.
Standard on CE · Optional on non-CE
Gearbox guard
Motor and gearbox guard: standard on the CE version, optional on the non-CE version.
Another configuration
Spirals
Horizontally, too
The tilting version changes the production orientation to make spirals easier to handle. Fit or remove the optional small-diameter kit as required.
Ask about this configurationComplete your workstation
Accessories
For your machine
OptionalWorkstationModular roller workbench
A storage surface and roller bed for rebar handling. An extendable 2-metre base module, adjustable feet and a dismantlable frame. For all TORO machines.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraProtectionMachine cover
Cover for all TORO models: cutting, bending, combined, stirrup and spiral machines. Protects the machine when not in use, with dimensions matched to the model.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
OptionalMachine configurationCAL35 small-diameter kit
Optional CAL35 kit for small bar diameters Ø 6–8 mm. Extends the standard Ø 10–32 mm range downwards; it can be fitted to and removed from the prepared work surface.
For:Spiral machines
Details and compatibilityStandard on CE · Optional on non-CEMachine configurationGearbox guard
Motor and gearbox guard: standard on the CE version, optional on the non-CE version.
For:Spiral machines
Details and compatibilityConfirm compatibility and power supply for your specific model.