Built for productivity
Processes up to 5 bars of Ø 6 mm simultaneously with 65 kg/mm² steel. See the table for other combinations of diameters and quantities.
ST-16 · 100% Made in Italy
ST-16 stirrup bending machine
The ST-16 stirrup bending machine produces reinforcing-steel stirrups and can bend several bars together. A measuring device with two movable stops, clamping vice and foot pedal are standard. See the capacity table for bar diameters and quantities.
Request informationST-16Models
Ø 18 mmStated maximum diameterBending capacity
5 × Ø 6 mmBars processed together65 kg/mm² steel
Capacity depends on material and configuration.
Compare technical data
1 / 4
Inside the machine
Small diameters, steady output
Measurements under control
A stirrup-side measurer, angle-setting pins and bushes to support the bar as it rotates.
A complete workstation
Pedal control, two emergency stops on opposite sides, and single-phase and three-phase versions.
Choose your configuration
Models and specifications
| Specification | ST-16 |
|---|---|
| Stated maximum diameter | Ø 18 mm |
| Power supply | Single-phase or three-phase |
| Stirrup measurer | Included |
Bending capacity · 65 kg/mm² steel
| Number of bars | Maximum bar Ø (mm) |
|---|---|
| 1 | Ø 18 |
| 2 | Ø 12 |
| 3 | Ø 10 |
| 4 | Ø 8 |
| 5 | Ø 6 |
Included with the machine
Standard equipment
Components, tools and controls supplied with your TORO. Differences between CE and non-CE versions are shown below.
Standard equipment
ST-16 equipment
1 Ø 22 mm stirrup-bending pin, 1 Ø 16 mm stirrup-bending pin, 2 bush-holding pins, 1 Ø 50 mm bush, 1 foot pedal and a set of Allen keys. Pin diameters do not indicate bar-bending capacity.
Standard equipment
Clamping vice
Included as standard: keeps bars aligned and limits stirrup spreading during bending.
Standard equipment
Measuring device with two movable stops
Measuring device for setting stirrup side lengths, complete with two movable stops.
Standard on CE · Optional on non-CE
Phase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
Complete your workstation
Accessories
For your machine
Standard on CE · Optional on non-CEElectrical controlPhase monitoring relay
Three-phase versions only: monitors phase presence and sequence. Standard on CE machines, optional on non-CE versions.
For:Cutting machinesBending machinesCombined machinesStirrup bending machines
Details and compatibility
OptionalWorkstationModular roller workbench
A storage surface and roller bed for rebar handling. An extendable 2-metre base module, adjustable feet and a dismantlable frame. For all TORO machines.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraProtectionMachine cover
Cover for all TORO models: cutting, bending, combined, stirrup and spiral machines. Protects the machine when not in use, with dimensions matched to the model.
For:Cutting machinesBending machinesCombined machinesStirrup bending machinesSpiral machines
Details and compatibility
Maintenance · ExtraMachine configurationOriginal spare-parts kits · Stirrup bending machines
Original spare-parts kits for cutting, bending, combined machines and ST-16. Contents and availability depend on the model: always include the serial number with your enquiry.
For:Stirrup bending machines
Details and compatibilityConfirm compatibility and power supply for your specific model.